How to Choose and Use a Jig Saw | Ask This Old House

Build It
Ask This Old House general contractor Tom Silva shows the best uses for a jigsaw and how to choose the right one for the job
SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse

Time: none

Cost: $30-$400360

Skill Level: Moderate

Tools List for Choosing and Using Jig Saws:
Jigsaws
Drill/Driver
Screwdriver
Lineman’s Pliers

Shopping List:
None

Steps:
1. Choose which type of grip suits you best. There is the barrel-handle jigsaw or the top-handle jigsaw. This is largely a comfort choice, so try out both.
2. This saw is great for curved cuts, circle cuts and scribed cuts on walls.
3. The orbital setting is important when choosing a jigsaw. Jigsaws cut in an upstroke and the orbital setting controls how much the blade moves back and forth. At zero, the blade moves straight up and down like a sewing needle.
4. For fine cuts, keep the orbital setting low. A higher setting is more powerful, but less precise.
5. Also, check the speed setting. The speed of the blade of the blade can impact the power of the blade. The thicker the wood, the more speed you may want. Use slower speeds to cut metals and plastic.
6. Look at the bevel setting. Lay the bevel flat for a zero-angle cut. Move the bevel for a more angled cut like a 45-degree.
7. Choose a blade depending on what type of cut you want to make. If you want to cut something fine, like a veneer, use a blade with the teeth facing down, so the blade cuts down and not up.
8. For a more aggressive cut, use a blade with the teeth facing upward, so the blade cuts on the upswing.
9. There are blades with teeth both up and down for a moderate cut.
10. Be sure to look at how the blade connects to the saw. Some jigsaws accept “T” type shank while others accept a straight shank, so choose the one that matches your saw.
11. When making a cut, make sure the shoe is level on the cutting surface. If it isn’t, it’s possible the blade could jump.
12. Keep a firm grip on the saw to prevent the blade from jumping.
13. Let the saw do the work. Do not push or pull the saw. This could drastically affect the cut.

Resources:
Tom demonstrated best jigsaw practices by showing several examples, including the 561593, Festool Carvex Ps 420 EBQ Jigsaw, manufactured by Festool (http://www.festoolusa.com/) and the JS470E Top-Handle Jigsaw, manufactured by Bosch Power Tools (https://www.boschtools.com/us/en/).

Jigsaw blades can be purchased from home centers and hardware stores.

About Ask This Old House TV:
Homeowners have a virtual truckload of questions for us on smaller projects, and we’re ready to answer. Ask This Old House solves the steady stream of home improvement problems faced by our viewers—and we make house calls! Ask This Old House features some familiar faces from This Old House, including Kevin O’Connor, general contractor Tom Silva, plumbing and heating expert Richard Trethewey, and landscape contractor Roger Cook.

Follow This Old House and Ask This Old House:
Facebook: http://bit.ly/ThisOldHouseFB
Twitter: http://bit.ly/ThisOldHouseTwitter
http://bit.ly/AskTOHTwitter
Pinterest: http://bit.ly/ThisOldHousePinterest
Instagram: http://bit.ly/ThisOldHouseIG
http://bit.ly/AskTOHIG
Tumblr: http://bit.ly/ThisOldHouseTumblr

For more on This Old House and Ask This Old House, visit us at: http://bit.ly/ThisOldHouseWebsite

How to Choose and Use a Jig Saw | Ask This Old House
https://www.youtube.com/user/thisoldhouse/

Products You May Like

Articles You May Like

Post-Inspection – Who Should Pay for Repairs?

Leave a Reply

Your email address will not be published.