SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse
Time: 3 hours
Skill Level: Moderate
Tools List for Replacing Damaged Vinyl Siding:
Vinyl siding pieces
1. When vinyl siding is first installed, it is nailed through a nailing strip. The bottom of the next course is locked in to the nailing strip of the course below.
2. When replacing siding, try to purchase a piece from the same manufacturer in the same color.
3. Work your hand in to a seam between pieces, then release the siding from the nailing strip.
4. Pull the nails holding the damaged siding and remove the damaged piece.
5. Push the new piece into the nailing strip of the course below.
6. Nail the siding loosely to allow for expansion and contraction.
7. If the whole piece of siding isn’t damaged, the damaged section can be cut away using a utility knife and speed square.
8. Cut the patch long. Remove a piece of the nailing strip and on the back to allow for expansion and contraction.
9. To lock the final piece in place, use a zip tool.
Tom uses a zip tool to reinstall vinyl siding, which can be found at the local home center.
Replacement siding can be found at a building products store or a vinyl siding distributor.
About Ask This Old House TV:
Homeowners have a virtual truckload of questions for us on smaller projects, and we’re ready to answer. Ask This Old House solves the steady stream of home improvement problems faced by our viewers—and we make house calls! Ask This Old House features some familiar faces from This Old House, including Kevin O’Connor, general contractor Tom Silva, plumbing and heating expert Richard Trethewey, and landscape contractor Roger Cook.
Follow This Old House and Ask This Old House:
For more on This Old House and Ask This Old House, visit us at: http://bit.ly/ThisOldHouseWebsite
How to Replace Damaged Vinyl Siding | Ask This Old House